ATS Single Pistol Mag Pouch

Other products in the category Military Equipment / Tactical Equipment and Tactical Gear / US Made Tactical Equipment / Tactical Equipment - Made in the USA:

ATS Combat Leader Admin Pouch -- ATS Combat Leader Admin Pouch Made in the USA! The Combat Leader Admin Pouch is designed around the "Rite in the Rain" tactical field book (980 and 980T). An excellent field notebook with great tactical resources within for combat leaders, it needed an equally impressive admin pouch to carry it. This pouch features a generous internal capacity with a small amount of give to allow the carry of objects other than a flat notebook. There is a row of internal 1" elastic with dividers to carry pens, pencils, chemlights, cell-phone, etc. It has a cord tie-down loop on either side of the pouch to secure sensitive or high value items. There is also a flat zippered pocket on the front of the pouch that is perfect for a passport ID, or other credentials that can be accessed without opening the Velcro main lid. It is compatible with any MOLLE platform and made in the USA of the highest quality mil-spec materials.

ATS Frame Sheet Insert -- ATS Frame Sheet Insert Made in the USA! Designed specifically for the RAID Pack and Cobra Pack, but works with other similarly shaped packs. Features aluminum insert for add rigidity and support. The sheet slides right into internal sleeve of our RAID Pack and Cobra Pack to provide improved back support and load carrying capability. The aluminum stay can be curved and molded to your back by bending to provide a custom fit. As with all our products, the Frame Sheet insert is made in the USA of the highest quality materials.

ATS M14 Modular Chest Harness -- ATS M14 Modular Chest Harness Made in the USA! The .308/M14 Modular Chest Harness (MCH-M14) is the latest evolution of the combat tested R.A.C.K. design. It has 4 integral mag pouches that accommodate one M14/SR25 magazine each (M14 mags pictured are not included). Mag retention is with a bungee pull tab and the Sure-Grip material that lines the pouches. The body of the vest features 4 rows of MOLLE compatible webbing for a wide range of possible configurations. The shoulder straps are 2" flat webbing with no buckles, d-rings or loops that may snag or interfere with the shouldering of your weapon. The shoulder harness is an H-Style harness with a wide range of adjustment for almost any body shape or size. The harness is also completely removable so that it will be compatible with future harness upgrades like a hydration back panel. The M14 Modular Chest Harness is made entirely in the USA of the highest quality mil-spec materials and comes with a lifetime warranty.

ATS MBITR Radio Pouch -- ATS MBITR Radio Pouch Made in the USA! The MBITR Radio Pouch is the perfect way to carry your individual commo unit. It is a low-profile, no frills design that is sized for the MBITR, but also will fit similarly sized radios like the Motorola SABRE. The cover flap is made of IR resistant 3" nylon webbing and has a plastic stiffener to protect the LCD display on the face of the radio. The flap has a 550 cord adjuster to fit different radio sizes and is secured with Velcro and a 1" side-release buckle. It can be attached to an MOLLE compatible system using our patented L-Strap fastners. As with the rest of our product line, it is made in the USA out of quality mil-spec materials.

ATS Padded H-Harness -- ATS Padded H-Harness Made in the USA! The Modular Padded H-Harness is designed to integrate seamlessly to any of our Chest Rigs including the Modular Chest Harness and the Low Profile Chest Harness and offer the user a padded, modular platform. It uses .25" closed cell foam padding as well as Drilex on the underside for added comfort and moisture wicking. The shoulder straps each have four rows of MOLLE compatible webbing for a variety of pouch mounting options. There is a 6" piece of loop Velcro across the back for IFF patches and nametapes. The Modular Padded H-Harness is made in the USA of the highest quality materials.

ATS Rigger Belt -- ATS Rigger Belt The ATS Rigger's Belt has taken this decades old design to a new level. Incorporated in the belt itself is a slot that can be used to carry a pistol "Bandolero" style. The design completely covers the trigger guard area of most medium and large frame semi-auto pistols including all Glock models, 1911 style pistols, and the issue M9 Beretta. The belt itself is constructed of Type 13 cargo webbing and parachute grade buckles. Sized in Small (30-34), Medium (34-38), Large(38-42), and X-Large(42-46) to fit most operators. As with the rest of this product line, it is built with pride in the USA.

ATS Roll-Up Dump Pouch -- ATS Roll-Up Dump Pouch Made in the USA! The Roll-Up Dump Pouch is sized to hold approximately six M4 30-rnd mags. It also works perfectly as a carrying pouch for shotgun shells and allows for convenient carrying/loading of several boxes of shells. The Roll-Up Dump Pouch also serves as a multi-purpose utility pouch suitable for evidence collection or general carry of items that aren't a good fit for more traditional pouches. It uses shock cord closure to adjust the size of the opening of the pouch. A 3" webbing flap doubles as a lid or can be concealed completely within the bag. It also serves to secure the pouch in its rolled up position. In its folded state, the Roll-Up Dump Pouch is only 3" x 4" x 1.75" and can be attached to MOLLE or PALS webbing by means of the two included Velcro duty belt wraps. The two duty belt wraps are removable to allow for other mounting options. There is a grommet located on the bottom allows for quick drainage. Like all our products,this pouch is made in the USA of quality, mil-spec components.

ATS Small Medical Pouch -- ATS Small Medical Pouch Made in the USA! The Small Medical Pouch is an advanced design that exceeds the current standard for individual first aid kits. When seconds count, standard trauma equipment can be difficult to access because usually, the pouch stays attached to the vest or pack of the casualty. The most revolutionary feature of our Small Medical Trauma Pouch is that it can be instantly removed from its MOLLE compatible backing platform and then used independently as the situation dictates. This means that you don't have to roll the casualty around in the dirt or dump the contents of the pouch out to go to work on him. The difference could be life itself! The pouch is arranged as a "clam-shell" zippered design with elastic webbing on the interior in order to arrange the trauma supplies in a consistent fashion. The pouch also has an interior slot pocket for smaller items. The pouch features a red pull/carry handle to help designate the contents within as life saving equipment. The handle can be completely stowed between the pouch and the MOLLE backing panel if not needed. A cord loop for tie-downs and a drainage grommet round out its features. It can be attached to any MOLLE compatible system using our patented L-Strap fastners. As with the rest of the ATS Equipment line, the Small Medical Pouch is made entirely in the USA of the highest quality components and is backed by a lifetime guarantee.

ATS War Belt -- ATS War Belt Made in the USA! This War Belt offers a fresh perspective on the padded first line belt. Long gone are the days of an old LC-1 belt with a cobbled together padded backing. The War Belt is a padded cover that is designed to slip over an existing belt system up to 2" in width. It offers full length 1/4" high-density, closed cell foam padding for comfort with three stacked rows of MOLLE compatible webbing on the outer cover. The outer cover is opened along the bottom allowing access to the duty belt within (belt not included). This allows the user to hang pouches, holsters, and drop-leg hangers that are not MOLLE compatible off the inner belt. The padded belt is sized to work with the ATS Rigger's Belt (Large with Large, etc.). The padded belt also has four loops along the top to add an optional set of suspenders. As with all our products, the padded War Belt is made in the USA and comes with a lifetime guarantee. M (30-34), L (34-38), XL (38-42) Riggers Belt and Suspenders sold separately.

ATS War Belt Insert Belt -- ATS War Belt Insert Belt Made in the USA! ATS War Belt Insert Belt is a lightweight belt designed specifically to work in conjunction with our Padded War Belt. It is constructed of a single piece of 2" Cordura webbing sandwiched between to layers of loop Velcro and then stitched 5 times to give it stiffness. While not as stiff as a belt made out of scuba webbing, our belt will also work as a stand alone Duty Belt without the use of the Padded War Belt. The belt fastens in the front with a 2" dual adjust side release buckle. As with the rest of our product line, the ATS War Belt Insert Belt is made in the USA of the highest quality materials. S/M (30-38), L (36-42), XL (40-46)

ATS War Belt Suspenders -- War Belt Suspenders Made in the USA! Used in conjunction with the War belt. Adjustable, one size fits most.

ATS Small Upright GP Pouch -- ATS Small Upright GP Pouch Made in the USA! The Small Upright GP Pouch is made to be able to fit smaller field items onto almost any area of MOLLE/PALS modular webbing. It is perfectly suited for the sides of modular chest harnesses like our MCH M4/M14 or the sides of a small assault pack like our Cobra pack. Though it is not padded, it is a perfect fit for a set of PVS-14's with the J-arm attached. The pouch closes with double slider, 550 zipper pulls; and it opens about half way for easy access to the contents without spillage. The pouch has several elastic loops on the interior for the organization of small items like batteries or chem.-lights. The interior of the pouch is finished out with a 550 loop tie-down point to secure sensitive or high-value items. Measures: 3" x 8" x 3" This pouch is constructed from 1000 denier abrasion and water-resistant CorduraR nylon and it attaches to any MOLLE/PALS modular webbing.

ATS Double M4 Mag Pouch -- ATS Double M4 Mag Pouch Made in the USA! The Double M4 Magazine Pouch was initially designed to give the ultimate in flexibilty to M4 Carbine operators. To accomplish this goal, the flap of this magazine pouch was made to be adjustable and removeable to allow for conventional Velcro closure, open top friction fit, or bungee closure. The added benefit of this configurable pouch design is that the exact same M4 magazine pouch can be simply and quickly converted to fit an AK magazine or a 7.62mm M14/SR25/AR10 magazine. The pouch also features a wrap around shock cord tensioner that allows the user to adjust the tension holding the magazines in place. It uses two of our patented L-Straps to attach it to any MOLLE compatible platform. The pouch is built entirely in the USA of the highest quality mil-spec components.

ATS Large Upright GP Pouch -- ATS Large Upright GP Pouch Made in the USA! The Large GP Pouch is made to be able to fit large field items onto large areas of MOLLE/PALS modular webbing. It is perfectly suited for the front of modular backpacks like the Lightfighter R.A.I.D. pack or it can be employed as a semi-permanent day pack for body armor wearers. The pouch closes with double slider, 550 zipper pulls; and it opens more than half way for easy access to the contents without spillage. It has an interior pocket with Velcro closure as well as an open top mesh pocket. The interior of the pouch is finished out with several 550 loop tie-down points to secure sensitive or high-value items. Measures: 9" x 8" x 3" This pouch is constructed from 1000 denier abrasion and water-resistant CorduraR nylon and it attaches to any MOLLE/PALS modular webbing.

ATS Medium Upright GP Pouch -- ATS Medium Upright GP Pouch Made in the USA! This Medium Upright GP Pouch is designed to be tall and deep to hold larger field items. The pouch closes with dual zipper pulls and the front of it has 3 rows of MOLLE compatible webbing for total modularity. The interior has a small cord tie-down loop for securing sensitive or high value items. For size reference, the pouch is a perfect fit for the 1 liter Nalgene bottle or a complete MRE meal. This GP Pouch attaches with our L-Strap fasteners and is combatable with all government issue MOLLE systems.

ATS Single M4 Mag Pouch - Short -- ATS Single M4 Mag Pouch - Short Made in the USA! This Single M4 Magazine Pouch is designed to securely hold one twenty or thirty round M4 style magazine. Our pouch features an open top that has an adjustable bungee retention cord around the body of the pouch. Bungee tension is adjustable using a tension cord lock. The Single M4 Magazine Pouch has additional 1" webbing on the front of the pouch allowing you to layer MOLLE compatible pouches on top of one another. This pouch is constructed from 1000 denier abrasion and water-resistant Cordura nylon and it attaches to any MOLLE/PALS modular webbing. M4 magazine pictured is not included.

ATS Single M4 Mag Pouch - Tall -- ATS Single M4 Mag Pouch - Tall Made in the USA! Our Single M4 Magazine Pouch, Tall is designed to securely hold a single thirty round M4 style magazine. The pouch features an open top design with an adjustable bungee retention cord and pull tab to secure the mag. The Single M4 Magazine Pouch has additional 1" webbing on the front of the pouch allowing you to layer MOLLE compatible pouches on top of one another. This pouch is constructed from 1000 denier abrasion and water-resistant Cordura nylon and it attaches to any MOLLE/PALS modular webbing. M4 magazine pictured is not included.

ATS Triple M4 Mag Shingle -- ATS Triple M4 Mag Shingle Made in the USA! The Triple Mag Shingle is designed to securely hold three M4 mags. It features an open top design with adjustable shock cord retention straps. These straps securely hold your loaded mags in place and allow you to quickly and quietly remove them when they are needed. The pouch has MOLLE compatible webbing on the front allowing you to stack two panels on top of each other or to add other modular pouches on top of it. This gives you the flexibility to "Layer" pouches. Though not originally part of the design, the user can also use one of the mag slots to carry a pistol with light attached. It attaches to any MOLLE compatible vest using our L-Strap attachment system. Made in the USA of quality mil-spec components, it is backed with a lifetime guarentee.

ATS Low Profile Chest Harness -- ATS Low Profile Chest Harness Made in the USA! The Low Profile Chest Harness is a combat chest harness with minimal bulk, weight, and "footprint." Out of the box, it is designed to carry three M4 magazines and has two small zippered utility pouches on either side. The harness is constructed with multiple layers of 1000d abrasion and water-resistant Cordura nylon for strength. This layering creates a small, but useful 'hidden' map pocket in the panel body behind the pouches. The Low Profile Chest Harness secures to the body of the wearer by means of a low profile H-harness and detachable waist strap. As with the rest of the ATS Equipment line, the Low Profile Chest Harness is made entirely in the USA of the highest quality components and is backed by a lifetime guarantee.

ATS M4 Modular Chest Harness -- ATS M4 Modular Chest Harness Made in the USA! The M4 Modular Chest Harness (MCH-M4) is the latest evolution of the combat tested R.A.C.K. design. It has 4 integral mag pouches that accommodate one M4 magazine each (M4 mags pictured are not included). Mag retention is with a bungee pull tab and the Sure-Grip material that lines the pouches. The body of the vest features 4 rows of MOLLE compatible webbing for a wide range of possible configurations. The shoulder straps are 2" flat webbing with no buckles, d-rings or loops that may snag or interfere with the shouldering of your weapon. The shoulder harness is an H-Style harness with a wide range of adjustment for almost any body shape or size. The harness is also completely removable so that it will be compatible with future harness upgrades like a hydration back panel. The ATS Modular Chest Harness is made entirely in the USA of the highest quality mil-spec materials and comes with a lifetime warranty.

Type your question here and click below... Live Chat by LivePerson